TANKO® MX_IOM_Rev0

Jet Cleaner TANKO-MX

9 Decommissioning Once the device has reached the end of its service life, it must be removed from the container, dismantled and disposed of in an environmentally friendly manner. Disposal must be performed in accordance with the respective valid local, national and international regulations.

WARNING

Removal Removal from the container and disassembly of the device for disposal must only be performed by experts. The section 7.3 Removal contains information on removal of the devices and its interfaces. The safety instructions in section 7.1 Safety Notes for Maintenance must be observed! there is a risk of intoxication or chemical burns! There is a risk of death or severe physical injuries.  Work must only be performed by an expert.  Before starting work, adhere to the working steps of the switch-off procedure (see section 7.2 Switch-off procedure).  Use protective work clothing, protective gloves and safety goggles when carrying out the work.  In case of any uncertainty or doubt, contact AWH. Danger due to improper removal from operation / disposal! When using harmful or toxic media or media which are hazardous in any other way,

9.1 Disposal

CAUTION

Danger from harmful liquids which are a health hazard! When performing disposal, there is a risk of injury from contact with harmful liquids. There is a risk of minor or moderate injuries.  Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).

80 / 86

Translation of the original operating/installation instructions 2016/03

9 Decommissioning

Powered by