11.1.7 Transfer Cart – SP333 Transfer carts are used to move the racks throughout the facility Transfer carts are designed to hold one rack A tray with a detachable collection bottle is provided to catch process soils and/or liquid during the transport through the facility The transfer carts are manufactured of 304ss and have a 32 µin Ra finish with welds color cleaned Carts are supported by two (2) straight and two (2) locking swivel casters of nylacron material The footprint of the SP333 transfer cart is 37" W x 51" D and the loading rail height is 36" 11.1.8 Transfer Cart – SP443 Transfer carts are used to move the racks throughout the facility Transfer carts are designed to hold one rack A tray with a detachable collection bottle is provided to catch process soils and/or liquid during the transport through the facility The transfer carts are manufactured of 304ss and have a 32 µin Ra finish with welds color cleaned Carts are supported by two (2) straight and two (2) locking swivel casters of nylacron material The footprint of the SP443 transfer cart is 51" W x 65" D and the loading rail height is 36" 11.1.9 Transfer Cart – SP444 Transfer carts are used to move the racks throughout the facility Transfer carts are designed to hold one rack A tray with a detachable collection bottle is provided to catch process soils and/or liquid during the transport through the facility The transfer carts are manufactured of 304ss and have a 32 µin Ra finish with welds color cleaned Carts are supported by two (2) straight and two (2) locking swivel casters of nylacron material The footprint of the SP444 transfer cart is 51" W x 69" D and the loading rail height is 36" 11.1.10 Part 3D Modeling – Design Cost (per Part)
A design engineer will 3D model each unique process component to be incorporated into the wash rack design The modeling will allow specific design elements to be incorporated into the rack and allow for repeatable component placement on the rack The modeling will take place at Sani-Matic’s facility via customer-provided drawings or process components shipped to Sani-Matic for modeling Shipping of the process components to and from Sani-Matic will be at the customer’s expense Sani-Matic retains ownership of the part models for sole use in rack design
NOTE: • Parts need to be shipped to Sani-Matic’s facility for this option
11.1.11 Part 3D Modeling – Trip (Budgetary) A design engineer will 3D model each unique process component so that they can be incorporated into the wash rack design The modeling will allow specific design elements to be incorporated into the rack and allow for repeatable component placement on the rack The modeling will take place at the customer’s facility reducing the amount of time that the process components are unavailable Generally, three components can be modeled per hour The number of components that can be modeled in the allotted time varies dependent on their complexity and their availability to the design engineerThis option is a budgetary value based on the provision of one (1) Sani-Matic technician for two (2) days, sixteen (16) hours of travel, and four (4) days of expenses Sani-Matic retains ownership of the part models for sole use in rack design
NOTE: • If selecting this accessory, the per part cost described in Section 11.1.10 Part 3D Modeling – Design Cost (per Part) does not apply • The final invoice is based on the actual hours worked and expenses invoiced at cost
sanimatic.com 22
TD-0002.4
Powered by FlippingBook