5. Physical Size & Layout The following is the overall size of the equipment as represented in the image below The default system orientation is a right-handed configuration, with the door swing to the right and the HMI interface to the left when viewing the system from the load side The Dryer System is a common option selected and is the only option that changes the listed system dimensions
Table 2: System Size
System Dimensions
Max System Depth - D Max (in)
System Weight (lbs)
Dryer - Weight Addition (lbs)
Dryer - Height Addition (in)
Chamber Model
Door Swing (in)
W (in)
D (in)
H (in)
SP333 SP443 SP444
96 42 97 110 56 97 110 60 105
53 67
42
4,300 4,600 5,400
900 lbs
23 23 23
56 56
1,000 lbs 1,000 lbs
71
"DOOR SWING"
"D MAX"
"D"
"DOOR SWING"
"W"
"H DRYER"
"H"
NOTE: • System dimensions and system weight listed are for standard options • System operating weight is dependent on the construction of the loaded parts rack when inside of the chamber • The image above shows the addition of the optioned dryer system (see Section 10.4 Dryer System ) and a pass-through double door design (see Section 10.1 Door Configuration ) • Door swing of 105° is needed for transfer cart clearance and engagement
sanimatic.com 8
TD-0002.4
Powered by FlippingBook