Gaskets will require periodic replacement. The frequency of gasket replacement will depend on the gasket material, operating conditions, and cleaning/CIP conditions – it is recommended to change them at least annually. Sight glass lens, ferrule, and clamp may require replacement if damaged or lost.
Troubleshooting Table 2: Troubleshooting Problems
Solutions
1. Tighten clamp to specifications, making sure the gaskets are aligned when assembling 2. If leakage is still occurring replace gasket. 3. Check the system pressure to ensure the pressure is not exceeding the pressure ratings of the assembly. 1. Make sure that sufficient flow (CIP in process piping) or sufficient spray coverage (CIP in process tanks or equipment) is being fed 2. Other CIP variables such as temperature, contact time, chemical, etc. need to be sufficient for the application
Leakage occurring at clamp connections
Unit is not being cleaned during CIP
Hygienic Component Solutions Catalog For latest technical, part number, and spare parts information, see our latest catalog:
Hygienic Component Solutions Catalog
DM-0012_VL-3A Sight Glass_IOM_Rev2.0
4 of 4
Powered by FlippingBook