d. System Data – Cycle Reports (Overview)
Run Time
Note (3)
Note (2)
Notes 1. The Cycle Reports tab contains all cycle information for cycles ran from the system. 2. The tab on the left that shows immediately contains each cycle ran in the filtered search criteria. By default, the last 7 days of cycle reports are shown. This can be hidden or shown by selecting the “<<” or “>>” icon on the tab. 3. Each cycle report’s approval status is noted by a banner on the left side, with the following color coding:
a. Green = Cycle Approved b. Red = Cycle Disapproved c. Grey + White Striped = Cycle Not Approved
4. IMPORTANT NOTE: Cycles are generated for any recipe that has been run for between approximately 5 seconds and 8 hours long. Recipes run for < 5 seconds are not stored and are likely occurring due to testing activities with the system. For recipes over 8 hours long, data capture becomes too large for recipe capture. This filter also eliminates conditions where a user starts a recipe and stops it without aborting or continuing the recipe for many hours or even days. Regardless of report capture, the raw system data is logged and available within the Data Trending section.
DM-0015_SaniTrend® Cloud CR Essentials_IOM_Rev1.0
15 of 37
Powered by FlippingBook