e. System Data – Cycle Reports (Searching)
Note (2a – 2g)
Note (1)
Notes 1. To search/filter for specific cycles, select “Search” on the sidebar below the cycle cards. 2. The window is replaced with the search functions – once filtered with the selected value(s), select “Search” or cancel or reset filters. a. Start Date / End Date – a date and time based search filter to search for cycles ran within a particular timeframe b. Quick Search – text-based search for searching recipe name, comment text, or other filters. c. Cycle Status (All / Approved / Not Approved / Disapproved) – filter for only cycles based on their approval status d. Runtime (minutes) – filter cycles by their total actual runtime in minutes. There are 2 selectable filters:
i.
“Greater than or Equal To” filter only shows cycles with times equal to or longer than the inputted value
ii.
”Less than or Equal to” filter only shows cycles with times less than or equal to the inputted value
DM-0015_SaniTrend® Cloud CR Essentials_IOM_Rev1.0
18 of 37
Powered by FlippingBook