Mini retractor system TANKO-RF
WARNING
Danger from incorrect use of materials/media! The materials/media to be used for operation of the device as intended are procured and utilized by the owner of the device. If unsuitable materials/media are selected, strong chemical reactions could result in fatal injury or severe physical injuries. • The proper selection and handling of these materials/media is the sole responsibility of the owner. • When selecting the materials/media, make sure that the permitted technical parameters of the device are NOT exceeded. • The cleaning agents and media must be approved for all of the materials of the device (e.g. washers, bushings) and for the substances in the container to be cleaned which come into contact with them. • Adhere to the specified chemical limits for use in the material data sheets. • Adhere to the safety data sheets provided by the manufacturers of the materials and media, in particular for hazardous substances: – Comply with the hazard and disposal instructions. – Set out protective measures and compile operating instructions for hazardous substances. – This also applies to hazardous substances that may develop during work processes.
Refer to the order confirmation/parts list from AWH for the materials used in the device. The device is used for the interior cleaning of containers with and without installed equipment. The small TANKO-RF design was developed for use in small containers and for pipelines.
The option of using retractor systems is useful, particularly in situations where there is little space available for a cleaning device, due to projecting agitators or other installations, or where critical products prevent permanent installation the device.
For the purpose of these instructions the word container refers to closed tanks, silos, barrels, containers, pipes, etc. that are provided with an outlet that ensures a free flow of the supplied cleaning medium. When using the device, it is necessary to distinguish between the following operating states. Operating State - Cleaning Process (Cleaning > Cleaning head extended > Cleaning medium is sprayed)
• Pressure in the container: 0 to 0.5 bar (0 to 7.25 psi g) • Temperature of the cleaning medium: +5 °C to +95 °C
• Ambient temperature in the container to be cleaned: +5 °C to +95 °C • Ambient temperature outside the container to be cleaned: +5 °C to +40 °C
18/84
Operating/Installation instructions 2023/09
2 Safety
Powered by FlippingBook