Mini retractor system TANKO-RF
2.4.1 Personal Protective Equipment Personal protective equipment must be used in accordance with the respective task when working on the device in order to minimize health hazards. Protective work clothing Protective work clothing is tight-fitting work clothing with low resistance to tearing, with tight-fitting sleeves and without protruding parts. It is mainly used for protection against becoming entangled in moving components. Do not wear any rings, necklaces or other jewelry. Safety shoes Wear slip-resistant safety shoes for protection against heavy, falling parts or for protection against slipping on slippery surfaces.
Protective gloves Wear protective gloves to protect your hands against friction, grazes, getting pierced or deep cuts and for protection against coming into contact with hot surfaces or chemical substances. Protective goggles Wear protective goggles for protection against media escaping at high pressure and against flying parts.
Hard hat Wear a hard hat for protection against falling or flying parts.
Hearing protection Wear hearing protection to protect yourself from an increased noise level (≥ 85 dB(A)).
Welding mask Wear a welding mask to protect yourself from damage to the eyes or skin caused by the welding arc and to protect against burns caused by flying particles during welding.
Personal protective equipment must be provided by the owner in accordance with the valid requirements. Furthermore, both the national regulations and, if necessary, the internal instructions from the owner must be observed.
24/84
Operating/Installation instructions 2023/09
2 Safety
Powered by FlippingBook