Mini retractor system TANKO-RF
4.3 Storage The packaging used for the device, the components and the replacement/wearing parts is designed to be stored for 3 months. NOTE Risk of damage to the device as a result of incorrect storage! Incorrect storage can cause damage to the device and its components and lead to premature aging (e.g. plastic parts). The failure of components or a device malfunction can cause material damage and consequential damage. • Adhere to the following storage conditions: – Store the device in the original packaging wherever possible. – Store the device in a clean and dry place (e.g. closed, dust-free room). – Store the device in steady environmental conditions. – Avoid major temperature fluctuations in order that condensation does not develop. – Prevent dirt and moisture from entering the device. – Protect the device from the elements (e.g. formation of condensation in the device, sunlight). – Protect unpacked devices or components with dust-tight covers. Condensation must not be allowed to develop beneath the cover. – Store the device without the original packaging, solely on a support suitable for the contour of the device.
Parameters for Storage (Recommended): – Closed, dry, dust-free room – Room temperature
+10 °C – +55 °C (+50 °F – +131 °F)
– Relative humidity
max. 60% (non-condensing) max. 10 °C (18 °F) per day
– Temperature fluctuations – Occurrence of vibrations
v eff < 0.2 mm/s
4 Transport and Storage
Operating/Installation instructions 2023/09
37/84
Powered by FlippingBook