Mini retractor system TANKO-RF
5.2 Installation The safety instructions in Section 5.1 Safety Instructions for Installation must be adhered to before installation of the device in the container. CAUTION Fault as a result of dirt, foreign objects or damage to the device! There is a risk of minor or moderate injuries. Before the device is installed for the first time and for assembly after conversion work on the system in which the device is installed, the following measures must be taken. • All supply and return lines for the cleaning medium must be rinsed thoroughly with clear water in order to remove any impurities, foreign objects or residues in the supply line (e.g. scale, chippings, welding particles etc.). • Take suitable measures to prevent dirt and foreign objects from entering via the interfaces of the device. Install a filter upstream of the media connection [MC] in the cleaning media supply line (see Section 3.3 Technical Data) Please also note: • If the device is used outdoors or in rooms where there is a risk of frost, it must be protected against freezing. • The process connection on the container [PC] and the connection [MC] for the cleaning medium must be firmly fastened and designed to be permanently technically tight (hazard due to fluid being expelled in the event of leaks). • The spray heads may only be operated with the corresponding locking pins from the manufacturer on the plate axle. When replacing a spray head, a new locking pin must be used on the plate axle.
40/84
Operating/Installation instructions 2023/09
5 Installation
Powered by FlippingBook