Mini retractor system TANKO-RF
Start-up
Before starting up the device in Germany, the owner of the plant must observe the Industrial Safety and Health Protection Ordinance (BetrSichV). In other countries, the respective national guidelines, statutes and country-specific regulations regarding occupational safety and accident prevention must be complied with.
WARNING
Hazardous situations as a result of incorrect installation of the device! If the device is not installed properly, unpredictable situations may arise during start-up or operation. There is a risk of death or severe physical injury. • As a basic rule, start-up of the device (with cleaning medium) must not be performed until the following have been checked: – Correct mechanical installation of the device on/in the container – Safe and reliable functioning of the device 6.1 Safety Instructions for Start-up Before operating the device, the owner must ensure that local regulations are observed during start-up. We recommend that you document start-up and the corresponding operating conditions in a report.
WARNING
Danger due to hot surfaces! The device is delivered without additional protective measures against hot surfaces and may NOT be equipped with thermal insulation. The device may heat up significantly as a result of the cleaning medium or the heat transfer from the container. Contact with the device can cause burns to the skin. There is a risk of burns from the cleaning medium at temperatures above +60 °C (+140 °F). • Insulate hot surfaces • Safeguard hot surfaces with a guard or barriers.
• Put up warning signs in the direct vicinity of the hot surfaces. • Wear protective work clothing and protective gloves when working.
6 Start-up
Operating/Installation instructions 2023/09
47/84
Powered by FlippingBook