TANKO® RF_IOM_Rev0

Mini retractor system TANKO-RF

WARNING Incorrect operation of the device! There is a risk of death or severe physical injury. • Only operate the device when it is in perfect condition.

• Only operate the device when installed in a closed container. • Drain and depressurize the container that needs to be cleaned. • Close all openings on the container (e.g. inspection openings) firmly. • When operating the device, adhere to the switch-on and switch-off procedure (see Sections 6.3 Switch-on Procedure and 7.2 Switch-off Procedure ). • There is no need for the device to be run in.

• The following operating states of the device are NOT permitted: – Immersing the device in the product of the production process. – Operation of the device outside the permitted parameters (see Section 3.3 Technical Data ). • Immediately stop operation in the event of leaks outside the container. • Refrain from any type of work which compromises the safe and reliable function of the device. • Immediately inform the owner of any changes to the device or the plant that may impair its safety. If you notice vibrations on the plant that are NOT generated by the device during start-up of the device, these must be prevented with suitable measures so that the vibrations CANNOT be transferred to the device. If this is NOT possible, the maintenance intervals must be shortened in accordance with Section 7.4.1 Maintenance Intervals . During normal operation of the device, you must make sure that the mixture of supplied cleaning medium and dislodged substances can flow freely out of the container. NOTE Any clogging in the drain of the container is to be eliminated at in order that: – no large quantities of dirt can accumulate in the container, – there is NO impermissible filling of the container with cleaning medium, – the device does NOT become immersed in the rising fluid level. For cleaning agent in circulation: Run the final cleaning step with clean water to remove any suspended matter that may have been introduced.

6 Start-up

Operating/Installation instructions 2023/09

53/84

Powered by