Mini retractor system TANKO-RF
Maintenance
The following safety instructions apply to all work on the device listed and described in this chapter, and must be observed at all times. Only use original spare parts when replacing parts of the device. A functional check must be performed after every repair (see Section 6.2 ).
If you have questions or doubts about the handling the cleaning device, please contact AWH.
7.1 Safety Instructions for Maintenance DANGER
Risk of fatal injury from electric shock through contact with live parts! Activated electrical components are live with dangerous electrical voltage and may perform uncontrolled movements. There is a risk of death or severe physical injury. • Only allow qualified electricians to perform work on the electrical system. • Before starting work, observe the work steps of the switch-off procedure (see Section 7.2 Switch-off Procedure). • Cover adjacent live parts to prevent contact. • Beware of the hazards caused by electrical current (e.g. warnings).
WARNING
Risk of falling when working at heights! When carrying out assembly/disassembly work on parts of the plant at heights, there is a risk of falling. There is a risk of death or severe physical injury. • Do not perform any work at heights except with a safety platform with cage or suitable fall protection (e.g. safety rope and safety harness). • If you are using a harness as fall protection, it is essential that the rescue concept for a person in the harness is observed. • A person must not remain suspended in the harness for longer than 15 min as there is otherwise a risk of shock or even death. • Wear protective work clothing, safety shoes, protective gloves and a hard hat for work at heights.
54/84
Operating/Installation instructions 2023/09
7 Maintenance
Powered by FlippingBook