Mini retractor system TANKO-RF
NOTE
Risk of damage to the device due to improper assembly/disassembly work! Assembly/disassembly of the device that is NOT performed properly can cause damage to the device which puts the functional safety and reliability at risk during restart. The failure of components or a device malfunction can cause material damage and consequential damage. • Use a vise with protective jaws, e.g. plastic or light metal, for clamping. • Only use suitable tools that do not damage the surface. • During assembly, observe the specified tightening torques (see Section 7.5 Spare Parts and Customer Service).
NOTE
Dirt or foreign objects in the device! Dirt or foreign objects can impair the functional safety and reliability of the device. • During assembly, make sure and check that there is no dirt or foreign objects in the device (e.g. small particles, sealing material).
NOTE
Edge compression in the area of the wrench flats! If workpieces are NOT grasped without play and in a protective manner by the flats during assembly/disassembly, then they are at risk of damage. • For gentle, protective assembly/disassembly work, use an adjustable or pliers wrench with parallel, smooth clamping jaws. • Apply the clamping jaws of the adjustable wrench or pliers wrench to the flats without play so that they rest evenly across the surface and loosen or tighten the screwed part.
60/84
Operating/Installation instructions 2023/09
7 Maintenance
Powered by FlippingBook