Mini retractor system TANKO-RF
Mounting ring
Mounting bolt
Figure 7.4-4: Mounting ring and mounting bolt
Assembly tools
Tool
Art. no. for TANKO-RF40
Art. no. for TANKO-RF50
664MW01050050
Assembly tool for wire locking pin Mounting bolt for TANKO-RF Mounting ring for TANKO-RF
664MW01060050
664MWRF400120 (AF 24) 664MWRF400220 (AF 24)
664MWRF500120 (AF 30) 664MWRF500220 (AF 30)
Table 7.4-2: Assembly tools
All the screw connections on the device are tightened to the appropriate tightening torque in the factory in order to ensure the necessary clamping force between the components that need to be connected, even when the maximum operating forces are applied.
All relevant tightening torques of the screw connections are listed in Section 7.5 Spare Parts and Customer Service in Table 7.5-1.
7.4.3 Disassembling the Device
The tools required for assembly/disassembly work are listed in Section 7.4.2 Tools and Tightening Torques.
The item numbers shown in parentheses refer to Figure 7.4-5: Internal design of TANKO-RF40 and TANKO-RF50 .
Table 7.5-1 includes a list of spare parts.
7 Maintenance
Operating/Installation instructions 2023/09
65/84
Powered by FlippingBook