TANKO® RF_IOM_Rev0

Mini retractor system TANKO-RF

7.4.5 Notes on Cleaning It is recommended for the device to be cleaned during maintenance. Follow the following safety instructions prior to cleaning. WARNING

Hazard from corrosive or irritant cleaning agents! There is a risk of death or severe physical injury. • Adhere to the regulations and specifications on the safety data sheets for the cleaning agents (e.g. vapors or hazardous substances). • Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles). • Avoid any excessively strong concentration of the cleaning agent. • Only use clean and chlorine-free water as a diluting agent. • Rinse the device with plenty of clean water after cleaning. • Store cleaning agent in accordance with the applicable safety guidelines.

NOTE

Risk of damage to the device during cleaning! The use of an incorrect cleaning agent or sharp objects can damage the device. The functional safety and reliability of the device may be impaired. • The cleaning agents must be approved for all materials in the device (e.g. seals, bushings). • Do not use sharp objects (e.g. knives) or tools.

Before commencing cleaning work, the work steps of the switch-off procedure must be carried out (see Section 7.2 Switch-off Procedure ). Prior to cleaning, the device must have been removed from the container by an expert and disassembled into its individual parts. The safety instructions in Section 7.1 Safety Instructions for Maintenance must be observed. Cleaning is carried out when disassembled by simply washing the surfaces that come into contact with media or using an ultrasonic bath. Cleaning media: e.g. 3% caustic soda Temperature: max. 70 °C – Only use clean and chlorine-free water as a diluting agent. – Measure carefully to avoid excessively strong concentrations of cleaning agent. – Rinse with plenty of clean water after cleaning. – When cleaning the parts of the device outside the container make sure that dust and adhering matter (e.g. grease and oil residues) are removed.

7 Maintenance

Operating/Installation instructions 2023/09

69/84

Powered by