Mini retractor system TANKO-RF
Cleaning of the device in a disassembled state can be carried out by instructed persons. After cleaning, the device must be assembled, checked and reinstalled in the container by an expert (see Section 5.2 Installation ).
NOTE
Environmental damage in case of improper disposal! Cleaning agents, auxiliary materials and lubricants must NOT be allowed to penetrate the
groundwater, waterways or sewer system. There is a risk of environmental damage.
• Dispose of any cleaning agents, lubricants and auxiliary materials (e.g. brushes and cloths) which were used for cleaning in accordance with the local regulations and in accordance with the information in the manufacturer’s safety data sheets. • Dispose of packaging materials in an environmentally friendly manner and recycle them.
7.5 Spare Parts and Customer Service
Spare Parts and Wearing Parts Subject to technical modifications in the interest of further development and improvement of the properties of the device. The article numbers, dimensions or materials may differ from those of the supplied device. The following data is important when requesting spare parts and for all inquiries: Device – Type – Serial number Spare part – Designation – Article no. Customer Service For technical questions or spare part requests, you can contact the Customer Service department as follows: Armaturenwerk Hötensleben GmbH Schulstrasse 5 – 6 D-39393 Hötensleben, Germany Telephone +49 39405 92-0 Fax +49 39405 92-111 E-mail info@awh.eu Internet http://www.awh.eu
70/84
Operating/Installation instructions 2023/09
7 Maintenance
Powered by FlippingBook