Mini retractor system TANKO-RF
For deviations from the standard, see the supplementary sheet “Special version”.
Item 1 Housing
PS DIN 32676 Clamp DN50 Thread G1 1/2"
Article number
Tightening torque
66RF05001CC20 66RF05001GC20
- - -
70 Nm
Table 7.5-7: Housing for TANKO-RF50
Item 11 O-ring Ø 26 x 2
Material
Article no.
Perm. operating temperature
1060500002603 1060500002604 1060500002605
EPDM
-20 °C (-4 °F) to +130 °C (+266 °F) -15 °C (+5 °F) to +140 °C (+284 °F) -15 °C (+5 °F) to +140 °C (+284 °F)
FKM (e.g. VITON ® )
FFKM
Table 7.5-8: O-rings for plate RF50
Item 12 O-ring Ø 42 x 3
Material
Article no.
Perm. operating temperature
EPDM
1060500004206 1060500004212 1060500004210
-20 °C (-4 °F) to +130 °C (+266 °F) -15 °C (+5 °F) to +140 °C (+284 °F) -15 °C (+5 °F) to +140 °C (+284 °F)
FKM (e.g. VITON ® )
FFKM
Table 7.5-9: O-Rings for Process Connection [PC] Clamp RF50 42x3
Item 12 O-ring Ø 37 x 3
Material
Article no.
Perm. operating temperature
EPDM
1060500003701 1060500003702 1060500003703
-20 °C (-4 °F) to +130 °C (+266 °F) -15 °C (+5 °F) to +140 °C (+284 °F) -15 °C (+5 °F) to +140 °C (+284 °F)
FKM (e.g. VITON ® )
FFKM
Table 7.5-10: O-Rings for Process Connection [PC] Thread RF50 37x3
Item 13 Welding adapter for TANKO-RF50
PA DIN 32676 Clamp DN50 Thread G1 1/2"
Article no.
Tightening torque
66RF0500AC020 66RF0500AG020
- - -
70 Nm
Table 7.5-11: Welding adapter for TANKO-RF50
74/84
Operating/Installation instructions 2023/09
7 Maintenance
Powered by FlippingBook