Mini retractor system TANKO-RF
Faults
8.1 Safety Instructions for Troubleshooting Before rectifying a fault, the following safety instructions must always be adhered to:
WARNING
Risk of chemical burns and heat burns when opening the container! The supply line is pressurized. The person could be hit by cleaning jets or come into contact with residual fluid from the supply line and device. There may also be hot vapors in the container. There is a risk of death or severe physical injury. • Do NOT open the container during the cleaning process. • Before starting work, observe the work steps of the switch-off procedure (see Section 7.2 Switch-off Procedure). • Before opening the container, observe the cooling and draining time . • Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).
WARNING
Hazardous situations caused by performing work on the device incorrectly! There is a risk of death or severe physical injury. • Repairs and troubleshooting work must be performed only by qualified experts who have knowledge of the German Technical Rules for Operational Safety (TRBS). • Before starting work, observe the work steps of the switch-off procedure (see Section 7.2 Switch-off Procedure). • Before rectifying any fault, observe the safety instructions in Chapter 7 Maintenance. • In case of any uncertainty or doubt, contact AWH.
8 Faults
Operating/Installation instructions 2023/09
75/84
Powered by FlippingBook