TANKO® RF_IOM_Rev0

Mini retractor system TANKO-RF

Shutdown Once the device has reached the end of its service life, it must be removed from the container, dismantled and disposed of in an environmentally sound manner. Disposal must be performed in accordance with the respective valid local, national and international regulations. NOTE ON EXPLOSION PROTECTION

Work on the device in an explosive atmosphere is PROHIBITED! If this is not observed, the explosion protection could be invalidated. • Only allow instructed personnel to work in potentially explosive atmospheres. • The personal protective equipment must meet the explosion protection requirements. • Do not use a tool that could generate sparks.

WARNING

Danger due to improper shutdown/disposal! There is a risk of intoxication or chemical burns when using harmful or toxic media, or media which is hazardous in any other way. There is a risk of death or severe physical injury. • Have the work carried out by an expert only. • Before starting work, observe the work steps of the switch-off procedure (see Section 7.2 Switch-off Procedure). • Use protective work clothing, protective gloves and safety goggles when carrying out the work. • In case of any uncertainty or doubt, contact AWH. Removal Only experts are permitted to perform the removal from the container and the disassembly of the device for disposal. Section 7.3 Removal contains information on the removal of the devices and its interfaces. The safety instructions in Section 7.1 Safety Instructions for Maintenance must be observed.

9 Shutdown

Operating/Installation instructions 2023/09

79/84

Powered by