5. Physical Size & Layout
The following is the approximate overall size of the equipment The standard system orientation is a right-handed configuration, with the HMI interface and controls on the right when viewing the system from the load side
Table 3: System Size
System Dimensions
Open Door Depth and Cart Length - Clearance (in)
Open Door Depth - Door Swing (in)
Max System Width - W Max (in)
Max System Depth - D Max (in)
Chamber Model
System Weight (lbs)
W"
D"
H"
PC335 PC365
51 51
53 100 88 120
81 81
77
43 43
96
3,700 4,200
117
136
Cabinet Washer
Rack/Transfer Cart
Plan View
Front View
NOTES: • The Right-Handed system configuration, featuring some non-standard options, is shown in the above image • The "CLEARANCE" dimension includes the length of the chamber door and the associated rack positioned in front of the door • System dimensions and system weight listed are for a system with all standard options − System operating weight is dependent on the construction of the loaded rack • The PC365 has two (2) 12" flanged connections on the top of the cabinet that are combined into one (1) 12" flanged connection with a shared duct manifold (not shown) • All selectable product options within the model key fit within the footprint shown except for non-standard model key selections made within the following options:
− Dryer System (See Section 10.3 Dryer System ) − Exhaust Fan (See Section 10.4 Exhaust Fan ) − Heat Exchanger - Steam (See Section 10.5 Recirculated Heating )
sanimatic.com 10
TD-0008.3
Powered by FlippingBook