Once a rack design has been selected, there are three (3) different framework weld finishes that the rack can be manufactured to: • As Welded / Bead Blasted Finish: welds are left as is, with the entire framework and welds bead blasted • Color Cleaned Welds: welds are color cleaned, with the remaining framework left as-is (32μin Ra finish) • G&P Welds: welds ground out, with the remaining framework left as-is (32μin Ra finish) Between the rack designs and framework weld finishes, there are twelve (12) available options:
Table 12: Available Custom Rack Options Rack Design Framework Weld Finish
Certifications
As Welded / Bead Blast Finish Color Cleaned Welds G&P Welds As Welded / Bead Blast Finish Color Cleaned Welds G&P Welds As Welded / Bead Blast Finish Color Cleaned Welds G&P Welds As Welded / Bead Blast Finish Color Cleaned Welds G&P Welds
Custom PC335 Rack
3-A/NSF 14159-1
Custom PC335 Active Rack
Custom PC365 Rack
3-A/NSF 14159-1
Custom PC365 Active Rack
NOTES: • Custom Racks and Custom Active Racks are priced as budgetary until the custom rack design is finalized and approved • 3D part models are required for rack design • The type and quantity of parts that each custom rack can hold is finalized during detailed rack design • All custom-designed racks are engineered and designed with final detailed drawings being sent to the customer for approval before fabrication • Heavy Duty Wheels are required when rack and part load weight exceeds 400 lbs Standard rack wheels are UHMW material while heavy duty wheels are 316L stainless steel Heavy Duty Wheels are not 3-A/NSF 14159-1 certified • Two (2) PC335 racks can fit into a PC365 chamber model – each rack requires a transfer cart Only one (1) PC335 Active Rack can be used in a PC365 chamber at one time
sanimatic.com 26
TD-0008.3
Powered by FlippingBook