11.2 Transfer Carts Transfer carts hold and transfer racks into and out of the chamber, as well as transport the racks between the SaniCab PC and process equipment in other areas of the facility The following are the carts available for use with the SaniCab PC cabinet washer:
Table 13: Available Transfer Carts
Cart Dimensions
Transfer Cart Name
Loading Rail Height (in)
W"
D"
H"
Transfer Cart - PC335
Transfer Cart – PC335 Transfer Cart – PC365
32 56 44 32 94 44
20 20
NOTE: • Each transfer cart is designed to hold one (1) rack of the same size (eg, one (1) Transfer Cart – PC335 will hold one (1) PC335 rack)
The transfer carts are manufactured of open frame, 304 stainless steel angle, and solid bar with a bead blast finish Carts are supported by two (2) straight and two (2) locking swivel casters of solid polyurethane material The carts have safety locking features to secure the rack on the transfer cart during transport and lock the cart into the SaniCab PC during rack loading and unloading
12. Accessories
12.1 Rack Additions
NOTES: • All custom rack development requires 3D part models of all parts Two (2) different 3D modeling service options are provided in this section for developing process part 3D models • The detailed design of the custom racks and finalized pricing occurs after end-user part loading constraints are established and all process parts are 3D modeled The cost difference between the budgetary value and finalized custom design, if applicable, is adjusted during the project
sanimatic.com 27
TD-0008.3
Powered by FlippingBook