TD-0008_SaniCab® PC_Technical Datasheet_Rev3.0

• Loose Ship Components − Thirty (30) Feet of 05" polyethylene tubing for chemical supply − One (1) 025" check valve installed at the chemical injection port

NOTES: • Depending on the number of chemical additions needed, multiple chemical delivery skids may be purchased to meet your system needs • All chemical delivery skids are to be mounted within thirty (30) feet of the SaniCab PC chemical injection ports Installation of the loose ship pneumatics and wiring between the cabinet washer and the chemical delivery skid, as well as chemical skid location and installation, is by others

12.2.5 Chemical Delivery Skid – Electronic Metering Pump The Chemical Delivery Skid – Electronic Metering Pump is a loose ship package which dispenses chemical at a lower rate and with a greater level of control into the chamber as required by the cleaning cycle This chemical delivery skid is ideal for use with chemicals that require lower concentration levels The assembly includes: • Chemical Delivery Skid − Framework ◊ Design: Open frame ◊ Material: 304 stainless steel angle ◊ Surface Finish: Bead blast ◊ Fully welded single piece construction ◊ Four (4) Adjustable feet for locating the equipment at a fixed location in the facility The adjustability allows the equipment to be leveled on uneven or sloped surfaces − One (1) 15-gallon chemical container − One (1) PVC suction lance with foot valve for placement into the chemical container − One (1) Low level, adjustable height proximity switch with discrete output − One (1) Electronic metering pump (Pulsafeeder LPH8 or equivalent) ◊ Duty: 042 pgm @ 30 psi ◊ Electrical Requirements: 115VAC, 1 phase, 50-60 HZ ◊ Diaphragm: PTFE-faced CSPE − One (1) Manual bleed valve to aid in priming the pump • Loose Ship Components

− Thirty (30) Feet of 05" polyethylene tubing for chemical supply − One (1) 025" check valve installed at the chemical injection port

sanimatic.com 31

TD-0008.3