3.3 Sanitary Piping • Material: 316L stainless steel sanitary BPE tube and BPE fittings • Surface Finish: 32µin Ra ID / OD • Welding: Welds are performed manually per AWS D18.1 / D18.1M standards (latest edition). The weld interior is argon gas purged. • Weld Finish: As-welded ID / weld color removed OD • Slope: 1 / 8 " per foot / 1.0% (GSD2) • Connections: Tri-clamp fittings with single hinged heavy-duty clamps with wing nuts • Gasket Material: EPDM
NOTE: • Based on other product selections, other welding configurations may be available (see Section 10.18 Weld Configuration )
3.4 Electrical Conduit • Rigid Conduit: SCH 40 PVC • Flexible Conduit and Fittings: UL listed PVC with nylon fittings • Instruments requiring calibration are provided with extra cord to allow the device to remain connected and moved to a calibration cart 3.5 Pneumatics • Location: Instruments such as pressure regulators and solenoids are mounted inside the control panel. The air filter is located on the bottom of the control panel • Material: Interconnections within the control panel and pneumatic air lines from the control panel to the skid-mounted valves and equipment are run in a polyethylene tube
sanimatic.com 8
TD-0008.4
Powered by FlippingBook