Sani-Matic Clean-In-Place (CIP) Systems are designed and supported to meet individual process requirements from programming to documentation and service.
Advantages • Complete Clean. Proper CIP design and sizing ensure the required time, chemical, flow and temperature are in place to thoroughly remove residue, while reducing cycle time and operating costs. • Validatable. Complete documentation available to comply with regulatory and validation requirements. Data acquisition and reporting capabilities are also available. • Programming and Controls. Sani-Matic controls are designed to optimize cycle times and reduce chemical and water use. Ethernet communications interface with individual process control systems for an integrated solution. • Service. Sani-Matic’s dedicated service team is available for full technical support during the start-up and after installation.
Industry Standard Compliance • FDA Current Good Manufacturing Practices (cGMP), CFR Title 21, Part 820 • Underwriters Laboratory (UL): Controls, Standard 508
• ANSI/ISA-88 (S88) Batch Control • Authorized to Provide Canadian Registration Numbers (CRN) • ASME BPE Standards
Features
1 Tank System • Single-use source of cleaning solution and rinse water • Low capital investment
2 Tank System • Single-use source of cleaning solution and rinse water • Stationary design • Once-through or recirculated • Decreased cycle time over single-tank design
• Portable or stationary design • Once-through or recirculated • Minimal space requirement
1 Tank Schematic
2 Tank Schematic
Pharma 1-Tank
Pharma Multi-Tank
CE
FE
CIP Return
CE
FE
CIP Return
TE
TE
CIP Supply
RO
WFI
CIP Supply
Drain
RO
WFI
Drain
Chemical Supply
Steam
Wash/Rinse
Steam
Wash Solution
Rinse
AIR
AIR
LE
LE
LE
CE PE
FE
CE PE
FE
TE
TE
Supply Pump
Supply Pump
Chemical Supply
Chemical Supply
Drain
Drain
Condensate Return
Condensate Return
Drain
Drain
sanimatic.com
Powered by FlippingBook