3.1) Safely Lifting and Transporting Prior to moving the CyClean, if the unit is currently installed, ensure all utility connections are disconnected from the CyClean.
Disconnect the Cyclonejet 360° Spray Arm as shown below. Support the spray arm so it will not fall, then remove the slip collar holding the spray arm in place.
The approximate weight of the Cyclonejet 360° Spray Arm is 50lbs.
Disconnect the pump and motor from the system by disconnecting two (2) tri-clamp connections as shown below. The 1 st tri-clamp will be located on the discharge end of the pump and the 2 nd tri-clamp will be located on the side of sump. Disconnect the motor from the electrical harness by opening the service panel on the motor.
The approximate weight of the pump and motor assembly is 350lbs.
CleanWorx ™ CyClean ™ 35 IOM
Powered by FlippingBook