STEP 2: Measure the distance between the floor and the bottom flange on the CyClean as shown below. Move to the back side of the CyClean and adjust these feet such that the distance measured is the same on the back side of the washer.
Step 3: Open the door and install an unloaded Sanitation Cart into the CyClean. If the Sanitation Cart interferes with the CyClean, repeat steps 1 & 2 and reduce height by ~1/4”. If this issue persists, contact your local CleanWorxs representative. Otherwise, the CyClean leveling process should be complete. Mounting holes are included as part of the leveling feet. It is at the discretion of the end user whether they are to be used, and if used, it is the end user's responsibility to determine appropriate mounting hardware.
Once the height has been set, ensure the jam nut is tightened to prevent the feet from accidentally being further adjusted.
CleanWorx ™ CyClean ™ 35 IOM
Powered by FlippingBook