DM-0018_CleanWorx™ CyClean™ 35_IOM_Rev1.2

Step 2: When turning the power on to the CyClean, the warning screen (shown below) will appear to notify you that there has been a power loss to the PLC. See section 9.1) Error Code Descriptions for more information. To clear this screen, ensure the E-Stop is not engaged, press the reset button, then press the check mark (F2) button on the HMI touchscreen.

E-Stop

Reset

Button Image

Function

Description

Acknowledges the error code. If the error is resolved, the error code will not display again.

Approve

Decline

Closes the error code display screen.

Provides an error code that can be referenced in greater detail in this IOM. For additional information see section 9.1) Error Code Descriptions . Shows the error code display screen. NOTE: This button will display on operational screens when an error code is active.

IOM Error Code

Active Error Codes

23

Powered by