Step 7: The next screen, shown below, is referred to as the Summary Screen and will be the final screen before the selected Wash Recipe runs. On the right side of the screen, a white box will show and cycle through the selected Wash Recipe and options. If the operator needs to make any changes, they can press the back button to take them to the previous screen. Once the operator presses the start (F2) button, the Wash Recipe will begin, and the operator will no longer be able to return to previous screens. The start button will change to a green background indicating the Wash Recipe is active. The operator can, at any point during the active Wash Recipe, press the pause (F3) button. This will stop all active functions. The operator can then either resume the active Wash Recipe by pressing the play button (F2) or cancel the active Wash Recipe by pressing the stop (F4) button. Once the stop button has been pressed, the CyClean will enter a forced drain mode to remove any water from the machine.
CleanWorx ™ CyClean ™ 35 IOM
Powered by FlippingBook