DM-0018_CleanWorx™ CyClean™ 35_IOM_Rev1.2

Main Settings Screen

Once past the password-protected screen, the main screen of the settings menu will be displayed. The active run hours are displayed in the upper left corner of the screen and the software version is displayed in the upper right corner. In addition to the menu selection choices on the bottom of the screen, the primary language can be changed by selecting one of the available languages displayed on the screen. The active language will be highlighted in green. If a specific language is desired, please reach out to your local sales representative.

Button Image

Function

Description

Modifies of the “Short”, “Medium”, or “Long” Wash Recipe Setpoints. See section 5.4) Configuring a CyClean Wash Recipe for more details. Modifies system Setpoints used across all three (3) CyClean Wash Recipes. Access several diagnostic functions and the CyClean to utilize any optional accessories installed. Configures the HMI touchscreen. IMPORTANT: This manual will not cover this function, and only qualified personnel should use this function. If equipped and enabled, checks the status the SaniTrend Cloud unit and allows the PLC to be reset.

Edit Wash Recipe Setpoints

Edit System Setpoints

Advanced Settings Menu

Configure PanelView 800

SaniTrend Cloud Status

33

Powered by