The Modular Sanitation Cart consists of a primarily bolted frame on wheels with two (2) vertical uprights. These vertical uprights have a series of equally spaced slots that replicate the functionality of an adjustable or modular shelving unit. These shelves are referred to as Part Modules and are designed to fit into the slots on the vertical uprights and hold specific dirty parts. The vertical uprights have a total of thirty-two (32) slots, sixteen (16) on either side of the Sanitation Cart.
C35 Baking Trays
C35 Baking Trays – Exploded View
While Part Module designs may vary, they will follow a similar procedure to install onto the Modular Sanitation Cart, shown below. Start by identifying an appropriate installation slot in the vertical upright. Each Part Module will have at least one (1) hook designed to sit within this slot. Insert that hook into the slot, then adjust the Part Module so that the mounting holes in both the vertical upright and Part Module align. Finally, use the applicable hardware to secure the Part Module to the vertical upright.
49
Powered by FlippingBook