Part Module Example with Flexible Installations The General Parts Part Module, shown below, is an example that shows a Part Module with flexible installation options. Unlike previously discussed Part Modules which have specific slot requirements, flexible Part Modules typically accommodate a wide variety of parts with varying dimensions. As a result, the recommended MINIMUM and MAXIMUM required slots are noted on the Part Module. It is required that when configuring a Sanitation Cart with Part Modules that have flexible installation options, the appropriate number of slots are reserved based on the intended parts being used on the respective Part Module.
The standard spacing between slots on the Modular Sanitation Carts is four (4) inches.
C35 Part Module – General Parts
53
Powered by FlippingBook