Monthly inspection required at minimum Component Examine for 1 Wash chamber
- Inspect for any hard water (scaling) issues as well as any contaminants, cleaning as needed - Ensure spray Arm is spinning smoothly and consistently. Disassemble and inspect as needed to ensure hub is not damaged or wearing prematurely
2 Spray Arm Bushing
Yearly inspection required at minimum Component Examine for 1 External Piping Seals
- Replace all tri-clamp seals as needed.
2 Pump
- Inspect, repair, or replace any pump seals
8.2) Recommended Spare Part Kits Spare part kits have been created and are listed below. Individual components of these kits are identified in section
61
Powered by FlippingBook