7.2) Accessory Connection Details
Conductivity Chemical Control
This CleanWorx accessory includes a 2” tee with conductivity sensor and an M12 connection cable. The preferred location to install this tee with conductivity sensor is between the spray arm hose and temperature sensor tee as shown below. Other piping connections may need to be adjusted to allow the hose to bend nicely.
Once installed, the M12 cable can be connected between the conductivity sensor and the control box connection mentioned in section 7.1) Typical Accessory Electrical Connections. If using a 3rd party accessory, consult the included schematics to ensure that the switch is wired correctly. Any mechanical or electrical integration will be the responsibility of the end user.
67
Powered by FlippingBook