4) Poor Cleaning
Possible Cause
Solution
a) Spray nozzle plugged b) Spray arm not rotating
Clean nozzle
- Check rotations and clean rotary bushing. Should rotate between 10-20 RPM. - Adjust temperature setpoint. - Consult with chemical supplier.
c) Temperature too low
d) Low pump pressure
- Pump running backwards. - Leaky seals drawing air.
e) Cycle time too short
Adjust cycle time
f) Stainer plugged
Clean strainer
CleanWorx ™ CyClean ™ 35 IOM
Powered by FlippingBook