10.3) Available Programmable Accessory Definitions
The table below contains the programmable accessories that are available to select as covered in section 5.2) Advanced Settings . By default, all accessories are set to “0” or disabled. Depending on what accessories you have installed, at initial startup, these accessories will need to be set to “1” or enabled.
Accessory
Notes
1 SaniTrend Cloud 2 SaniTrend Cloud Required 3 Conductivity Sensor 4 Chemical Pump 5 Sanitizer Pump 6 Chemical Low Level Switch 7 Sanitizer Low Level Switch
10.4) Glossary of Terms
Term
Definition
Operation
The background coding that turns on or off an output User defined setting or variable within a Wash Recipe A predefined grouping of operations within the Wash Recipe Sealed bottom portion of the CyClean 35 that holds water The inside of the CyClean 35, where the CycloneJet 360° Spray Arm washes dirty parts Dedicated programs that automate the CyClean
Setpoint
Step
Sump
Wash Cylinder
Wash Recipe
95
Powered by FlippingBook