B-0019_CIP Systems - SaniTech™_Brochure_Rev4.0

CLEAN-IN-PLACE (CIP) SYSTEMS: Consistent, Sanitary Cleaning of Process Lines, Tanks, and Equipment.

Clean-In-Place (CIP) Systems are engineered to your specific plant application and utility requirements for effective and efficient process equipment cleaning. Proper CIP design and sizing ensure sufficient flow and appropriate pressure to thoroughly remove residue, rinse effectively, shorten cycle times, reduce operating costs, and promote worker safety. SaniTech™ CIP Systems are sanitary in design and can be engineered to 3-A guidelines.

FROM

ADVANTAGES

Sani-Matic controls are designed to optimize cycle times and reduce chemical and water use. Ethernet communications interface with individual process control systems for an integrated solution. Programming & Controls Sani-Matic welders have decades of experience constructing sanitary systems and welding to AWS D18 standards. Craftmanship Documentation Automatically document your critical cleaning cycle information (e.g., time, temperature, flow, chemical) with SaniTrend® Cloud or Local reporting options. Services ShieldCare ™ Life of Ownership Services including start-up, preventive maintenance (PM) plans, replacement parts, and more.

INDUSTRY STANDARD COMPLIANCE •  UL 508A •  ANSI/ISA-88 Batch Control •  Helps Meet FSMA and HACCP Sanitation Preventive Controls • Can be built to 3-A guidelines

SANITREND® CLOUD REPORTING SOFTWARE

CLEANING CYCLE REPORTS (CR ESSENTIALS)

Add SaniTrend ® Cloud Cleaning Reports (CR) software to your equipment to efficiently and automatically record and store critical data (e.g., temperature, conductivity). SaniTrend ® Cloud CR Essentials records all critical data in easy-to-interpret cleaning records. SaniTrend ® Cloud CR Insights adds features like event logs, Overall Equipment Effectiveness (OEE) scoring, Preventive Maintenance (PM) Tracking, and more.

CLEANING CYCLE REPORTS (CR INSIGHTS)

OEE TRENDING (CR INSIGHTS)

Learn more at our website: sanimatic.com/cleaning-reports/

CLEAN-IN-PLACE (CIP) SYSTEMS

SYSTEM AUTOMATION Sani-Matic has designed, manufactured, and supported thousands of CIP control systems with its in-house programmers and UL authorized panel shop.

ADVANTAGES OF SANI-MATIC SYSTEM AUTOMATION

Water & Chemical Savings Recipe optimization shortens cycle time and minimizes water and chemical use. Automation Ease & Flexibility Easy-to-understand Recipe Editor provides access to setpoints. Defined alarms reduce troubleshooting time. The Sani-Matic programming and automation team specializes in cleaning applications and provides proven expertise and customized strategies. Experts

We mix our industry expertise with the perfect combination of Time, Action, Chemical, and Temperature to deliver the best solution for your cleaning challenge.

Time Action Chemical Chemical Temperature Temperature

APPLICATIONS

Process Lines

Tanks

Equipment

3

Clean-In-Place (CIP) Systems can be portable or stationary, single-tank, two-tank, or multi-tank, single-use, reuse, or once-through, as well as designed for multi-circuit capabilities.

FEATURES

ONE-TANK

ONE-TANK SCHEMATIC

Single-use source of cleaning solution and rinse water Lower capital investment Portable or stationary design Once-through or recirculated Simple and flexible operation Lower space requirement

CE

FE

CIP Return

TE

CIP Supply

Water

AIR

Steam

Supply Tank

LE

Strainer

CE PE

FE

TE

Supply Pump

Chemical Supply

Condensate Return

TWO-TANK

TWO-TANK SCHEMATIC

Food Two-Tank

TE

Permits recovery and reuse of wash solution Used where water utilities are limited Supply/recirculation option Decreases wash cycle time

Water

CIP Return

FE CE

Drain

CIP Supply

Steam

Rinse Tank

Detergent Tank

AIR

LE

LE

Strainer

FE CE PE

TE

Supply Pump

Chemical Supply

Condensate Return

Drain

CLEAN-IN-PLACE (CIP) SYSTEMS

GOOD TO KNOW Looking for a standard 1 tank CIP System? Our CIP Mini product is a model key based, easy to specify & order offering for those just getting started with automated CIP or needing a smaller, portable unit. Find more information at our website.

THREE-TANK, FOUR-TANK, OR MORE

MULTI-TANK SCHEMATIC

Food Multi-Tank

TE

Permits recovery and reuse of wash solution and rinse water Reduces water and waste water costs Fourth tank may be added for acid wash and reuse applications

Water

CIP Return

FE CE

Drain

CIP Supply

Steam

Recovery Tank

Detergent Tank

Rinse Tank

AIR

LE

LE

LE

Strainer

FE CE PE

TE

Supply Pump

Chemical Supply

Condensate Return

Drain

MULTI-CIRCUIT SCHEMATIC (DUAL OPERATING)

MULTI-CIRCUIT

FOOD Duel Operating Reuse system

TE

CIP Return #2

Serves multiple circuits independently and simultaneously Substantial cost and space-saving advantages over multiple separate units Centralized controls Reduced wash and rinse cycle times

FE CE

Drain

TE

Water

CIP Return #1

FE CE

Drain

CIP Supply #1

Steam

Recovery Tank

Detergent Tank

Rinse Tank

AIR

LE

LE

LE

Strainer

FE CE PE

TE

Supply Pump #1

Chemical Supply

Condensate Return

Drain

CIP Supply #2

Steam

AIR

Strainer

FE CE PE

TE

Supply Pump #2

Chemical Supply

Condensate Return

Drain

5

ADVANCE YOUR CLEANING PROCESS Engineered for sanitary food and beverage manufacturing, our solutions deliver reliable, repeatable cleaning tailored to your unique process. Designed to improve and speed up cleaning performance, every system helps you enhance efficiency, strengthen food safety, and move closer to your automation goals. Ready for the next step in your sanitation journey? Advance with SaniTech ™ .

SANIMATIC.COM HELLO@SANIMATIC.COM 800-356-3300

2855 INNOVATION WAY SUN PRAIRIE, WI 53590

LOOKING FOR MORE INFORMATION? Scan the QR code to explore everything SaniTech has to offer.

B-0019.4

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6

www.sanimatic.com

Powered by