FEATURES
Standard For Both Models • A single centrifugal CIP supply pump
• Wetted surface: 316L stainless steel, 25 µin Ra Non-wetted surface: 304 stainless steel, 32 µin Ra • UL listed, 304 stainless steel, NEMA 4X enclosure
• Modulating diaphragm control valves to set cleaning circuit flow rates and to control the rate of discharge to drain • Two chemical delivery systems comprised of pneumatic diaphragm pumps, removable chemical reservoirs • Chemical conductivity, proof of rinse conductivity
• Allen-Bradley CompactLogix PLC • Allen-Bradley PanelView Plus HMI
• Supply and return temperature sensors • Electric flow-through heater • Discharge pressure gauge • Low friction, non-marking casters Optional For Both Models • Vent filter assembly
• Ethernet communication
• 40 customizable cleaning cycle programs
• Eductor return system
• Sani-Matic Start-up and Preventive Maintenance (PM) Services • Wetted Surface: 15 µin Ra Electropolish (EP) finish
• Pressure transmitter
• Mass flow meter
• Allen-Bradley PanelView Plus 1000
• Fixed position leveling feet • Frame weld finish upgrade • Sanitary flex hose package
• Report ticket printer • Stainless steel motor
• Steam Heat (shell and tube heat exchanger)
• Piping insulation
• Air blow manifold
• Fixed position seismic zone calculations
• Chemical reservoir low level switches
• Passivation
• CIP supply routing valves • Water connection bleed valves
• Spare parts budget • Larger electric heater
• Sample valve
UltraFlow 45
UltraFlow 110
• 68” L x 24” W x 74” H (height may vary with options)
• 74” L x 33” W x 80” H (height may vary with options)
• Operating range of 2–45 gpm @ 50 psi
• Operating range of 5–110 gpm @ 60 psi
• Electric
• Electric
• For process tank diameters up to 4.5’ • For process line diameters up to 2”
• For process tank diameters up to 10’ • For process line diameters up to 3”
• Turbine flow meter
• Turbine flow meter
Powered by FlippingBook