Features
UltraFlow 45 • 6 8" L x 24" W x 74" H (height may vary with options) • Operating range of 2–45 gpm @ 50 psi • Electric • For process tank diameters up to 4.5' • F or process line diameters up to 2" • T urbine flow meter
UltraFlow 110 • 74" L x 33" W x 80" H (height may vary with options) • Operating range of 5–110 gpm @ 60 psi • Electric • For process tank diameters up to 10' • F or process line diameters up to 3" • T urbine flow meter
Standard Features for Both Models • A single centrifugal CIP supply pump • M odulating diaphragm control valves to set cleaning circuit flow rates and to control the rate of discharge to drain • T wo chemical delivery systems comprised of pneumatic diaphragm pumps, removable chemical reservoirs • C hemical conductivity, proof of rinse conductivity • S upply and return temperature sensors
• W etted surface: 316L stainless steel, 25 µin Ra Non-wetted surface: 304 stainless steel, 32 µin Ra • U L listed, 304 stainless steel, NEMA 4X enclosure
• Allen-Bradley CompactLogix PLC • Allen-Bradley PanelView Plus HMI • Ethernet communication • 4 0 customizable cleaning cycle programs • E ductor return system
• E lectric flow-through heater • D ischarge pressure gauge • L ow friction, non-marking casters Optional Features for Both Models
• V ent filter assembly • P ressure transmitter • M ass flow meter
• Wetted Surface: 15 µin Ra Electropolish (EP) finish • Allen-Bradley PanelView Plus 1000 • Report ticket printer • Stainless steel motor • S team Heat (shell and tube heat exchanger) • A ir blow manifold • C hemical reservoir low level switches • CIP supply routing valves • W ater connection bleed valves • S ample valve
• F ixed position leveling feet • F rame weld finish upgrade • S anitary flex hose package • P iping insulation • F ixed position seismic zone calculations • P assivation
• S pare parts budget • L arger electric heater • S ani-Matic Start-up and Preventive Maintenance (PM) Services
Operating Requirements
UltraFlow 45
UltraFlow 110
• Instrument Air • Water Supply
½" NPT, 10 scfm @ 90 psi
½" NPT, 10 scfm @ 90 psi
Two 1" tri-clamps, WFI, DI, potable ≤ 2 gpm @ 25 psi, 20°–80 °C 2" tri-clamp (controllable drain rate)
Two 1" tri-clamps, WFI, DI, potable ≤ 2 gpm @ 25 psi, 20°–80 °C 3" tri-clamp (controllable drain rate)
• Drain
• Dry Weight
900 lbs (approximate)
1,400 lbs (approximate)
• E lectrical Power (with electric heat) • E lectrical Power (with optional steam heat) - Plant Steam
12 kW, 27 amps (standard) or 24 kW, 43 amps (optional) @ 460V AC, 3PH
15 kW, 50 amps (standard) or 30 kW, 68 amps (optional) @ 460V AC, 3PH
11 amps @ 460V AC, 3PH
27 amps @ 460V AC, 3PH
¾" flange, 195 lbs/hr @ 50 psi ½" flange 1 ½" tri-clamp, 2–45 gpm @ 50 psi 2" tri-clamp, 2–45 gpm @ 8.5' of head @ 80 °C
1 ½" flange, 540 lbs/hr @ 50 psi 1" flange 2" tri-clamp, 5–110 gpm @ 60 psi 3" tri-clamp, 5–110 gpm @ 11’ of head @ 80 °C
- Plant Condensate
• CIP Supply • CIP Return
• Vent/Overflow
2" tri-clamp
2" tri-clamp
BPB-0006.3
Powered by FlippingBook