7. Digital Process Recorder – Reports – System Pages a. System Page – Overview
Note (2)
Digital Process Recorder
DPR
Cycle Reports
Notes 1. After selecting the system, the overview page will show. There are several sections within the system page. 2. At the top of each section the system’s general information is shown, including (from left to right): a. System Display Name – the name assigned to the system (see Facility Page – System Alerts (Change System Display Name) for instructions for changing this) b. System Name – “SaniTrend®” c. Model Number – “DPR” Note (3) 1. NOTE: This is known through setup of the Run Signal (See Facility Page – System Properties (Data Acquisition Configuration)). ii. Stopped iii. Disconnected a. System Status ( default view ) – A quick overview of current key system data b. Cycle Reports – Review, comment on, and approve all cycle data and reports from the system c. Data Trending – Review past analog data for the system (independent of cycle reports) d. System Alerts – Review alert notification history for the system e. Documentation – Review system links and documentation (see Facility Page – System Documentation and Facility Page – Global Documentation for more information) f. Connection Status – See current connection status data 3. Sections that can be selected for the system include: d. SMI Number – the unique job number assigned to the DPR control panel (for record) e. Status – the current status of the DPR control panel. Status is one of the following states: i. Running
DM-0013_Digital Process Recorder (DPR)_IOM_Rev2.0
31 of 56
Powered by FlippingBook