9. Documentation
One (1) electronic copy of the documentation package is provided as standard. The documentation is provided in the English language and includes the following information: • Warranty information
• HMI user and maintenance manuals • Recommended Spare Parts (RSP) list
• Mechanical Bill of Materials (BOM) • Component vendor documentation • As-built General Assembly (GA) drawings • As-built Process and Instrumentation Diagram (P&ID) • As-built electrical drawings
10. Product Options
10.1 System Configuration The Left-Handed configuration can be selected orienting the HMI interface, controls, and main external components on the left when viewing the system from the load side. This layout is a mirror image of what is shown in Section 5 Physical Size and Layout . 10.2 Dryer System The addition of the Dryer System – Electric option allows for heated drying and cooling phases to be included at the end of the cleaning cycle. These phases significantly reduce the amount of residual final rinse water on the parts and rack within the chamber prior to unloading the rack onto a transfer cart. The dryer system is integrated onto the SaniCab, side-mounted on the chamber opposite of the main control panel side. Air is pulled from the surrounding area where the dryer skid is installed and is discharged through the existing exhaust fan on the chamber. The following components and necessary controls are added to the system when selecting the dryer: • Dryer − Components ◊ One (1) Centrifugal fan • 900 acfm at 7" W.C. • Direct Drive • 3 HP TEFC Motor • 304ss construction ◊ One (1) Inline electric heater • 45 kW • 460V AC, 3PH, 60Hz • High temperature thermocouple ◊ 304ss supply ducting with EPDM gasketing ◊ One (1) 304ss mesh pre-filter, 50% efficient @ 100 micron ◊ One (1) Temperature transmitter with 30-230 °F range and 4-20 mA output • Chamber Additions − P335 Model: Four (4) 2.5" TC ports with pneumatic actuated TC butterfly valves for dryer air distribution throughout chamber − P365 and P565 Models: Four (4) 4.0" TC ports with pneumatic actuated TC butterfly valves for dryer air distribution throughout chamber • Electrical Components − One (1) Disconnect switch SaniCab P365 Dryer
− One (1) Motor starter for the dryer supply fan − One (1) Contactor for dryer electric heater − One (1) Controller for dryer electric heater
sanimatic.com 14
TD-0003.5
Powered by FlippingBook