11. Racks and Transfer Carts
11.1 Racks This section contains information on three different rack design tiers: general, standard, and custom racks
Racks are used within the SaniCab P chamber to hold the process parts to be washed The rack's support framework is manufactured of 304ss with a bead blast finish The racks are manually rolled on UHMW wheels from a transfer cart to the cabinet chamber All custom rack development requires 3D part models of all parts Two (2) different 3D modeling service options are provided in Section 12 for developing process part 3D models The detailed design of the custom racks and finalized pricing occurs after end-user part loading constraints are established and all process parts are 3D modeled Racks are designed to fit certain SaniCab P model(s) as shown in Sections 11.1.1 through 11.1.3
Table 10: Rack Use with Chamber Models
Applicable Chamber Models
Rack Name
P335
P365
P565
P335 Rack (General, Standard, or Custom) P365 Rack (General, Standard, or Custom) P565 Rack (General, Standard, or Custom)
x
x x
x
NOTE: • Racks listed in Section 11.1.3 Custom Racks are to be used as budgetary placeholders until the custom rack design is finalized and approved
11.1.1 General Racks Table 11: P335/P365 General Racks
Part Number
Rack Name
Description
A General Rack designed with four (4) shelves to hold miscellaneous parts • Shelf 1 - Construction: Sheet, 1 / 4 " perforated - Part Usable Space: 30" W x 29" D x 14" H • Shelf 2 - Construction: Round Bar, 4" Spacing on Depth - Part Usable Space: 30" W x 32" D x 18" H • Shelf 3 - Construction: Round Bar, 4" Spacing on Depth - Part Usable Space: 30" W x 32" D x 14" H • Shelf 4 - Construction: Round Bar, 4" Spacing on Depth - Part Usable Space: 30" W x 32" D x 8" H • One (1) rack fits in the P335 and two (2) racks fit in the P365
Shelf 4
Shelf 3
General 4-Shelf Rack
288521
Shelf 2
Shelf 1
NOTE: • The general rack is not customized to specific part requirements Drainability and cleaning performance of racks may be inhibited by variable loading conditions The rack is typically used for non-process contact parts such as tools, clamps, or other items where repeatable cleaning is not critical
sanimatic.com 24
TD-0003.5
Powered by FlippingBook