TD-0003_SaniCab® P_Technical Datasheet_Rev5.0

11.1.2 Standard Racks Standard rack designs accommodate common clean-out-of-place process parts such as weigh scale buckets (manufacturer and model specific), 3- and 5-gallon buckets, pallets, small and large totes, trays, and buggies Standard racks are available for use with the SaniCab P P335 and P365 chamber models (one (1) rack fits in the P335 and two (2) racks fit in the P365), as well as the P565, see Section 11.1, Table 10: Rack Use with Chamber Models for clarification

Table 12: P335/P365 Standard Racks

Part Number

Rack Name

Description

A Standard Rack designed to hold an inverted Buggy The Buggy Inverter accessory is required to invert the buggy from the ground onto this rack This is an Active Rack that is equipped with one (1) TANKO ® S rotary spray device that sits inside the inverted buggy for direct and thorough spray into the primary product contact areas of the buggy This Active Rack requires the Active Coupler connection option on the SaniCab P system • Holds qty one (1) buggy (200 to 600 lb capacities) • Approx. Buggy Size Requirements: - Length: 11" to 31"

Buggy Standard Active Rack

294094

- Width: 26" - Depth: 26"

NOTE: •  The P335 Buggy Standard Active Rack can be used in a SaniCab P365 with an Active Coupler along with a P335 non-active rack, as long as the Buggy Standard Active Rack is loaded into the washer before the P335 non-active rack Two (2) P335 Buggy Standard Active Racks cannot operate in a P365 at the same time

A Standard Rack designed to hold 3- or 5-gallon buckets A combination of each size can be loaded and cleaned in the same cleaning cycle •  Holds qty twenty-four (24) of 3- or 5-gallon buckets and twenty-four (24) lids • 3-gallon bucket size requirements:

3- and 5-Gallon Bucket Standard Rack

- Bottom Diameter Range: 6" to 11" - Top Diameter Range: 7" to 12 1 / 2 " - Height Range: 9 1 / 2 " to 10 3 / 4 " • 5-gallon bucket size requirements: - Bottom Diameter Range: 9 1 / 2 " to 11" - Top Diameter Range: 11 1 / 2 " to 12 1 / 2 " - Height Range: 14 1 / 8 " to 15 1 / 16 " • Lid Size Requirements: - Diameter Range: 8 5 / 8 " to 12 3 / 4 " - Width Maximum: 1 3 / 8 "

293857

sanimatic.com 25

TD-0003.5

Powered by