Spate cleaner TANKO-SF
Inspection and Maintenance Work
Check inlet openings for the cleaning agent and running surfaces for contaminations, wear and damage.
A
500 h O
S/F/R
Clean in the event of contaminations
Replace device in the event of wear or damage
Check whether the cage rotates freely. Check outlet openings for the cleaning agent and running surfaces for contaminations, wear and damage.
B
500 h O
S/F/R
Clean in the event of contaminations
Replace device in the event of wear or damage
Check running surfaces for contaminations, wear and damage.
C
500 h O
S/F/R
Clean in the event of contaminations
Replace device in the event of wear or damage
D
Replace O-ring with original part
500 h O
---
E
Replace wire locking pin with original part.
500 h O
---
Table 7.4-1: Inspection and Maintenance Work
NOTE Multiple utilization of the wire locking pin.
The material experiences fatigue and loses its rigidity when the wire locking pin is subjected to multiple bending. The nozzle carrier may come loose.
The device and the wire locking pin could fall into the container.
The wire locking pin is to be replaced by a new wire locking pin after it has been bent (see section 7.5.1 Spare Parts ).
7 Maintenance
Translation of the original Operating / Installation Instructions 2016/09 Rev.1 43/63
Powered by FlippingBook