TANKO® JM_IOM_Rev1

Jet Cleaner TANKO-JM

Consumption data and operating pressure for the cleaning process:

The specified values for consumption and rotation speed are average values, and may deviate by approx. ±10% during normal operation. They apply to operation with clean water as the cleaning fluid at a temperature of +25 °C / +77 °F. The values may differ if a different cleaning fluid and a different medium temperature are used. The consumption of cleaning fluid in TANKO-JM devices depends on multiple factors, e.g. the pressure of the cleaning fluid, the size of the nozzle openings and the size of the bores in the plugs of the inflow disk for regulating the speed. An increase in pressure leads to increased consumption (throughput). The permitted range for the operating pressure of the cleaning agent must be adhered to.

3.4 Cleaning Agents

Due to the wide variety of practical cases of application and use for the cleaning device, it is NOT possible for AWH to recommend specific cleaning agents for the operating company.

The operating company holds sole responsibility for the type of cleaning media, their use and handling.

For this reason, AWH can provide the owner with a few reference points and notes, but only as a precautionary measure (for a device in a container), which must be observed and integrated into the owner's risk assessments.

DANGER

Risk of explosion as a result of the formation of an explosive atmosphere! There is a risk of death or severe physical injuries.  The following items are PROHIBITED for use as cleaning agents: – Fluids which may form a dangerous explosive atmosphere when splashed or sprayed. – Fluids which cause a chemical reaction with the substance to be cleaned that could form a dangerous explosive atmosphere. – Aggressive, flammable or explosive fluids (e.g. acids, thinners, etc.).

WARNING

Warning against corrosive and aggressive cleaning agents! There is a risk of death or severe physical injuries.  Adhere to the regulations and specifications in the safety data sheets for the cleaning agents (e.g. vapors or hazardous substances).

3 Construction and Function Translation of the original Operating / Installation Instructions 2016/12

23/90