Jet Cleaner TANKO-JM
The following limitations for cleaning agents are derived from the durability of the materials used in the device.
CAUTION
Danger as a result of use of incorrect cleaning agents! There is a risk of minor or moderate injuries. The cleaning agents must be approved for all of the materials of the device (e.g. seals, bushings) and for the substances to be cleaned in the container that come into contact with it. The following items are PROHIBITED for use as cleaning agents: – Cleaning agents containing solids or liquids with solid particles or solid content (e.g. abrasives) which can lead to increased wear and/or blockages of the spray holes. – Cleaning agents containing substances which may cause exothermic reactions with the materials of the cleaning agent, the container of the plant, e.g.: – chlorine and chlorine ions – substances containing salt (no resistance to seawater) – medium-concentrated to highly concentrated organic acids – strong acids, in particular nitric acid and sulfuric acid (with acid content > 65%) – aliphatic, aromatic and chlorinated hydrocarbons – phenols – fluorine compounds Risk of damage to the device from the cleaning agent! Soiling or foreign objects in the cleaning agent can have a negative effect on the function of the device. There is a risk of material damage and consequential damages. Use a suitable filter system in the cleaning agent supply line. The use of a filter with a filtration effect corresponding to a mesh width of 50 µm is recommended. Adhere to the instructions on the supply and return lines in the section 5.2 Installation.
NOTE
The following agents are permitted for use for container cleaning:
Clean, sprayable fluids (e.g. water with alkali cleaning additives and similar).
24/90
Translation of the original Operating / Installation Instructions 2016/12 3 Construction and Function
Powered by FlippingBook