Jet Cleaner TANKO-JM
7 Maintenance
The following safety notes apply to all work on the device that is listed and described in this chapter and must be observed at all times. Use only original spare parts when replacing parts of the device. A functional check must be performed after every repair (see section 6.2 Functional Check / Trial Run ).
7.1 Safety Notes for Maintenance
DANGER
Fatal shock hazard through contact with live parts! Activated electrical components are live with dangerous electrical voltage and may perform uncontrolled movements. There is a risk of death or severe physical injuries. Allow only qualified electricians to perform work on the electrical system. Before starting work, observe the working steps of the switch-off procedure (see section 7.2 Switch-off Procedure). Cover adjacent live parts to prevent contact. Beware of the hazards caused by electrical current (e.g. warnings).
WARNING
Risk of accident caused by incorrectly performed maintenance and repair work! Improper maintenance, falling components or failure to adhere to the listed safety notes can lead to accidents. There is a risk of death or severe physical injuries. Allow only experts to perform work on the device. Do not work on the device unless it is insulated from electrical voltage, depressurized and in a cool state. Maintain a safe distance when working on the device. We recommend that you provide 1 m of space for free movement around the device and container.
7 Maintenance
Translation of the original Operating / Installation Instructions 2016/12
47/90
Powered by FlippingBook