Jet Cleaner TANKO-JM
If you notice vibrations on the plant while commissioning the device which are NOT generated by the device, then they must be prevented with suitable measures so that the vibrations CANNOT be transmitted to the device. If this is NOT possible, the maintenance intervals in section 7.4.1 Maintenance Intervals must be shortened accordingly. During normal operation of the device, you must make sure that the mixture of supplied cleaning agent and detached substances can flow freely from the container.
NOTE Clogging in the drain of the container is to be eliminated at once so that:
– no large quantities of dirt can accumulate in the container,
– there is NO impermissible filling of the container with cleaning agent,
– the device DOES NOT become immersed as the fluid level rises.
For cleaning agent in circulation: Run the final cleaning step with clean water to remove any suspended matter which may have been introduced.
46/90
Translation of the original Operating / Installation Instructions 2016/12
6 Commissioning
Powered by FlippingBook