Jet Cleaner TANKO-JM
7.3 Removal
The safety notes in section 7.1 Safety Notes for Maintenance must be adhered to before removing the device from the container.
WARNING
Risk of chemical burns and burns when opening the container! The supply line is pressurized. The person may be struck by cleaning jets or come into contact with residual fluid from the supply line and device. There may also be hot vapors in the container. There is a risk of death or severe physical injuries. DO NOT open the container during the cleaning process. Before starting work, observe the working steps of the switch-off procedure (see section 7.2 Switch-off Procedure). Before opening the container, observe the cooling and draining time. Use personal protective equipment (e.g. protective gloves, safety shoes, safety goggles).
CAUTION
Risk of a fault as a result of soiling, foreign objects or damage to the device! There is a risk of minor or moderate injuries. Implement suitable measures to prevent soiling and foreign objects from entering via the interfaces of the device. Before starting work, make sure that all necessary tools, accessories and information are available and observe the instructions for the interfaces. When lifting the device out of the container, maintain a gap from the inner wall of the container and surrounding components (e.g. agitators), to avoid scraping or knocking. Set the device down on a stable surface after removing it.
7.3.1 Removing the Device
Installation Opening of the Container
The use of the device (mobile or stationary) is the decisive factor for the required size of the installation opening. The specified installation dimensions in Table 3.3-1: Operating parameters of the device are
50/90
Translation of the original Operating / Installation Instructions 2016/12
7 Maintenance
Powered by FlippingBook